Acetylene

Acetylene MSDS

What is Acetylene?

Acetylene is colorless, with a faint garlic-like odor, and very flammable. It is widely used as fuel and chemical building block. Pure acetylene is unstable, so it is commonly handled in solution. Acetylene is used for welding and cutting due to the high temperature of the flame. Calcium carbide was used to generate acetylene for portable lighting. Acetylene is used to volatilize carbon in radiocarbon dating of archaeological samples. Acetylene is extremely flammable and easily explodes under pressure.

Acetylene Exposures and Health Risks

The primary risks of acetylene are due to the dangers of explosion or flame. Burns and frostbite are easily obtained from contact with expanding gas. Burns and frostbite should immediately be seen by a medical professional. Should contact occur, immediately flush area with plenty of water and remove any contaminated clothing. Inhalation can cause headache and dizziness, or even loss of consciousness in extreme cases. Should symptoms of inhalation be noticed, remove to fresh air, providing oxygen if necessary.

Regulations

ACGIH recommends a TLV-TWA of 5 mg/m³ for welding fumes. ACGIH labels acetylene as a simple asphyxiant in the case of overexposure. Acetylene does not have listed exposure regulations by NTP, OSHA, NIOSH, or IARC.

Sources: MSDS, NIOSH

Measuring Acetylene

We have both portable and fixed monitors with sensors designed specifically to measure levels of acetylene. To see our portable acetylene monitors, click HERE. To see our fixed acetylene monitors, click HERE.

/tbody>

D16	The D16 is a versatile tool designed for gas leak detection, personal safety, spot checking, confined entry, and data logging, and more. It can be used as a portable monitor or as a stationary one that can be set to log data over long periods of time. This customizable unit can be fitted with a variety of sensors and is sold with every accessory you may need for fast and accurate portable gas detection.	0-500ppm
F12	The Series F12 Gas Transmitter is an Intrinsically Safe monitor designed for the detection of toxic gases in hazardous areas. It is also well suited for general purpose applications. This highly customizable unit can be fitted with a variety of sensors and accessories and is compatible with most fixed mount toxic gas applications.	0-500ppm
F12D	The Series F12D Gas Transmitter is designed for detection of toxic gases in hazardous areas. It is also well suited for general purpose applications. This highly customizable unit can be fitted with a variety of sensors and accessories and is compatible with most fixed mount toxic gas applications.	0-500ppm
B12	The B12 transmitter is a two-wire, 4-29 mA transmitter that is loop-powered to signal linearly proportional to gas concentration. Their electrochemical sensors are designed for use in ambient air or in ventilation ducts. This highly customizable application can be fitted with a variety of sensors and accessories.	0-1000ppm

Contact us for help choosing the right Acetone Sensor for your application