John Deere Old Style to Pioneer Style Rear Remote Adapter - Replaces AR98201

This adapter allows you to connect an implement with ISO Pioneer hoses to John Deere tractors that have the Old Style (Cone Style) rear remotes. This part replaces John Deere part number AR98201.

NOTE: The "Ball" tip option has been discontinued, the "Poppet" tip is the only style available.

$36.74
Back Ordered. Expected to ship on March 30

JD Old Style (Cone Style) to Pioneer Rear Remote Adapter - Replaces John Deere PN# AR98201

This is a list of the John Deere tractor models that were originally manufactured with the Old Style rear remotes. The list is not exhaustive. Also, any of these tractors may have rear remote quick connects that have been permanently converted over to Pioneer style - always double-check the style on your tractor's rear remotes before getting adapter AR98201. John Deere tractor models 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2150, 2255, 2355N, 2155, 2240, 2350, 2550, 2355, 2555, 2440, 2510, 2520, 2630, 2640, 2750, 2755, 2855N, 2840, 2940, 2950, 2955, 3010, 3020, 3055, 3150, 3155, 3255, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4240, 4440, 4250, 4450, 4255, 4455, 4230, 4320, 4430, 4520, 4555, 4650, 4755, 4760, 4960, 4560, 4620, 4630, 4840, 4640, 4840, 4850, 4955, 5010, 5020, 6030, 7020.

NOTE: The "Ball" tip option has been discontinued, the "Poppet" tip is the only style available.

Video explaining how to figure out if your John Deere rear remotes are Old Style (Cone) or Pioneer:

 

Video Showing How to Connect Pioneer Rear Remote Adapters to Old Style International:

The image below shows the rear remotes of a John Deere 4020 tractor with the original quick connector setup. The shape of the quick coupler is like a cone, slanting slightly inward, and there is a moon-shaped metal piece that you can see at the tip of the cone. Some call it "John Deere Old Style" rear remotes. Others call it "Cone Style." The quick coupler adapter AR98201 (Pioneer part number 4060-4) converts this style rear remote to ISO Pioneer 1/2", so any implement with 1/2" ISO Pioneer hose tips will be accepted by this rear remote. 

JD 4020 with permanent Pioneer rear remotes

The image below shows the rear remotes on the John Deere 4020 that have been permanently converted to ISO Pioneer style with the John Deere kit RE206778 and will not require the JD Old Style to Pioneer adapter. It's important to be aware that any tractor that was originally manufactured with the Old Style (Cone) rear remote quick couplers may have been permanently converted over to Pioneer with this kit.

JD 4020 ISO Pioneer SCV Remotes

The image below shows the adapter installed, converting a JD Old Style rear remote to ISO Pioneer. This picture was taken for illustration purposes; in a real-life situation, normally the implement hose with the Pioneer style tipe would already have been connected to the female part of the adapter before the adapter was pushed into the old style rear remote.

John Deere 4020 with Pioneer SCV Adapter Installed

The image below shows the male John Deere Old Style coupler tip. In this picture, the male Old Style (cone) tip is threaded on one of the hoses supplying the front end loader with hydraulic oil. If you have an implement with the John Deere Old Style (Cone) male hose tips, the tips will look the same as that shown in this picture. 

John Deere 4020 Old Style Rear Remotes Adapter

The image below shows how sometimes the collar on the rear remote - the rings pointed to with the red arrows - gets pushed in. If this happens, no matter how hard you push on the coupler you're trying to install in the rear remote, the coupler will not click in. You need to pull on the oil switch while it's in the "off" position towards you to get the collars to pop back so they are flush with the outside body of the rear remote. Once they are flush with the body of the rear remote, you can push the male coupler in, and it will click right into place. 

Rear Remotes Not Accepting Quick Coupler

Pulling the rear remote oil switch back pulls the collar back as well: 

Pull John Deere Rear Remotes switch

 

Pull John Deere Rear Remotes switch

More Information
Conversion Styles 1/2" JD Old (Cone) to 1/2" Pioneer
Conversion Multiplier 1 to 1
Quickbooks Stock Level -5.000000
Quickbooks Stock Date Expected 2024-03-19 00:00:00
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Loading...