Koyker 110 Front-End Loader Parts

Select Koyker 110 Loader Parts Below:
NOTE: 110 was manufactured with two different size cylinders:
  • 1-3/4" Barrel ID (2-1/8" Barrel OD)
  • 2.0" Barrel ID (2-3/8" Barrel OD)
Grouped product items
Image Product Name Qty
K663304 - Rebuild Kit for 1-3/4" Koyker Cylinder (for Barrel ID 1-3/4" - Barrel OD 2-1/8")
K663304
$47.00
Hydraulic Cylinder Rod Seal Install Tool - Small Size - 0.7" up to 1.187" Shaft Diameter
IT100
$50.00
Rebuild Kit for Koyker Cylinders with 2-3/8" Barrel OD, 2.0" Barrel ID, 1-1/4" Shaft OD - K662051
K662051
$50.00
Hydraulic Cylinder Seal Install Tool - Medium Size - 1-3/16" up to 2.0" Shaft Diameter
seal-install-tool-medium
$48.00
K663305 - Gland Kit for 1.75” ID Koyker Cylinder
K663305
$50.00
K663310 - Gland Kit for 2.0” ID Koyker Cylinder
K663310
$61.00
K663306 - Piston Kit for 1.75" Koyker Cylinders
K663306
$64.00
K663311 - Piston Kit for 2.0" Koyker Cylinders
K663311
$63.00
Rubber Boot Cover for Small Koyker Joystick (Loaders 50 - 345) - K664541
K664541
$35.00
Hydraulic Valve with Joystick for Compact and Utility Tractors - PN# 673010C
673010C Assembled
$375.00
Koyker 110 LH Lift Cylinder - 1-3/4" Bore - 655010
K655010
$435.00
Koyker 110 RH Lift Cylinder - 1-3/4" Bore - 655016
K655016
$430.00
Koyker 110 LH Lift Cylinder - 2.0" Bore - 654946
K654946
$442.00
Koyker 110 RH Lift Cylinder - 2.0" Bore - 654942
K654942
$436.00
Koyker 110 Bucket Cylinder - 1-3/4" Bore - 655000
K655000
$360.00
K654982 - 2.0" Bucket Cylinder for Koyker 110 Loader
K654982
$392.00
Koyker 110 Lift Cylinder Shaft (for Cylinder with 1-3/4" Bore) - 655014
K655014
$125.52
Koyker 110 Lift Cylinder Shaft (for Cylinder with 2.0" Bore) - K654950
K654950
$75.00
Koyker 110 Bucket Cylinder Shaft (for Cylinder with 1-3/4" Bore) - 655002
K655002
$115.13
Koyker 110 Bucket Cylinder Shaft (For Cylinder with 2-3/8" Barrel OD, 2.0" Barrel ID, 1/1-4" Shaft OD) - K653909
K653909
$63.00
18" Hydraulic Hose for Koyker 110 Loader - 654692
K654692
$39.00
26" Hydraulic Hose for Koyker Loaders - From Valve to Hard Lines - 668819
K668819
$40.00

Downloadable Koyker 110 Front-End Loader Manual

 

Koyker 110 Loader Parts

Parts for Koyker 110 Front End Loader

Koyker 110 Loader Packing Kits:

  • 1-3/4" Packing (Rebuild) Kit: K663304
  • 2.0" Packing (Rebuild) Kit: K662051

Koyker 110 Loader Aluminum Glands (Plugs):

  • 1-3/4" Aluminum Gland (with seals assembled on it): K663305
  • 2.0" Aluminum Gland (with seals assembled on it): K663310

Koyker 110 Loader Aluminum Piston (Plunger):

  • 1-3/4" Aluminum Piston (with assembled seals): K663306
  • 2.0" Aluminum Piston (was assembled seals): K663311

Koyker 110 Loader Cylinders (1-3/4" bore - 2-1/8" barrel OD):

  • LH Lift Cylinder (1-3/4" bore): 655010
  • RH Lift Cylinder (1-3/4" bore): 655016
  • Tilt Cylinder (1-3/4" bore): 655000


Koyker 110 Loader Cylinders (2.0" bore - 2-3/8" barrel OD):

  • LH Lift Cylinder (2.0" bore): 654946
  • RH Lift Cylinder (2.0" bore): 654942
  • Tilt Cylinder (2.0" bore): 654982

Koyker 110 Loader Cylinder Chrome Shafts (Rams) for 1.75" bore cylinders:
NOTE: The same chrome shaft is used with both LH and RH lift cylinders that have the same bore.

  • Chrome shaft for lift cylinders with 1.75" bore: 655014
  • Chrome shaft for bucket cylinders with 1.75" bore: 655002

Koyker 110 Loader Cylinder Chrome Shafts (Rams) for 2.0" bore cylinders:
NOTE: The same chrome shaft is used with both LH and RH lift cylinders that have the same bore.

  • Chrome shaft for lift cylinders with 2.0" bore: 654950
  • Chrome shaft for bucket cylinders with 2.0" bore: 653909

Koyker 110 Loader Hydraulic Hoses:

  • There is only one hose part number that is used for EXTEND and RETRACT on all the Koyker 110 cylinders: PN# 654692. This is an 18-inch hydraulic hose.
  • The hose going from the valve to the hard lines on the loader: PN# 668819. This is a 26-inch hydraulic hose. The same hose is used for each of the ports on the valve - raise, lower, dump, and retract.

Koyker 110 Loader Control Valve with Joystick:

  • PN# 673010. This is a dinoil, 2-function valve. The kit includes: valve, joystick (not installed), PBY sleeve and closed center plug (not installed). The valve is shipped open-center. The sleeve or closed center plug can be installed to make it power beyond or closed center. Installation instructions are included with the valve kit.

Measurement Conversion Table for Koyker 110 Cylinders and Seal Kits:

NOTE: To find the inside diameter (ID) of the barrel on a Koyker cylinder, subtract 3/8" from the barrel's outside diameter (OD).

Barrel ID Barrel OD Shaft OD Seal Kit PN#
1.75" (1-3/4") 2.125" (2-1/8") 1.0" K663304
2.0" 2.375" (2-3/8") 1.25" (1-1/4") K662051
[1:40 PM] Sophie Van Anken

 

How to easily install cylinder rod seal kits:

How to rebuild your Koyker loader cylinder:

Measuring to find the correct kit:

 

 

More Information
Manufacturer Koyker Mfg
Call For Price No
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
We found other products you might like!
Loading...